|
|
|
|
|
 Uluslararası Hakemli Dergilerde Yayınlanan Makaleler: |
|
|
[01] N.Yağız, İ.Yüksek, S.Sivrioğlu, "Robust Control of Active Suspensions for a Full Vehicle Model Using Sliding Mode Control" , JSME International Journal, Series C, Vol. 43, No.2, 2000, pp.253-258.
[02] N. Yağız, İ. Yüksek, "Sliding Mode Control of Active Suspensions for a Full Vehicle Model", International Journal of Vehicle Design, Vol. 26, Nos. 2/3, 2001, pp. 264-276.
[03] N. Yağız, İ. Yüksek, "Robust Control of Active Suspensions Using Sliding Modes", Tr.J. of Engineering and Environmental Science, 25-2, pp.79-87, March 2001.
[04]
N. Yağız, "Sliding Mode Control of a Multi-Degree-of-Freedom Structural System with Active Tuned Mass Damper", Tr.J. of Engineering and Environmental Science, 25(2001), pp.651-657.
[05]
N. Yağız, "Robust Control of a Spatial Robot Using Sliding Modes", Mathematical & Computational Applications, Vol. 7, No. 3, 2002, pp. 219-228 .
[06] İ. Yüksek, N. Yağız, S.Sivrioğlu, "An Evaluation of Sliding Mode Control for Vehicle Suspensions", Journal of Robotics and Mechatronics, Vol. 14, No. 4, 2002, pp. 420-428.
[07] N. Yağız, C. Ertal, "Evaluation of Control Methods on a Structural System", Mathematical & Computational Applications, Vol. 8, No. 3, 2003, pp. 369-376 .
[08]N. Yağız, "Vibration control of a building with ATMD under earthquake Excitation", International Journal of Applied Mechanics and Engineering, Vol. 8, No. 1, 2003.
[09] N. Yağız, İ.Yüksek, K.Yüksek, R.Güçlü, Y.Kikushima "Analysis of Viaduct Road Vibrations Using Cluster Filtering and Actuation", Tr.J. of Engineering and Environmental Science, 27 (2003), pp.213-219.
[10] N. Yağız, "Comparison and Evaluation of Different Control Strategies on a Full Vehicle Model with Passenger Seat Using Sliding Modes ", International Journal of Vehicle Design, Vol. 34, No.2, 2004..
[11] R. Güçlü, N. Yağız, "Comparison of Different Control Strategies on a Vehicle Using Sliding Mode Control", IJST, Transaction B, Vol.28, No:B4, 2004.
[12] N. Yağız, A.Gürsel, "Active Suspension Control of a Railway Vehicle with a Flexible Body", Int. J. Vehicle Autonomous Systems, Vol. 3, No:1, 2005.
[13] İ. Yuksek, T. Kepçeler, R. Güçlü, N. Yağız, "Cluster Control of Viaduct Road Vibration", International Applied Mechanics, Vol.41 , No.10, pp.139-144, October 2005. .
[14]L.E. Sakman, R. Guclu, N. Yağız, "Fuzzy Logic Control of Vehicle Suspensions with Dry Friction Non-linearity", SADHANA, Vol.30 , Part 5, October 2005, pp.649-659, 2005.
[15] N. Yağız, Y. Hacıoğlu, "Fuzzy Sliding Modes with Moving Surface for Robust Control of a Planar Robot", Journal of Vibration and Control, Vol.11 , pp.903 -922 , 2005.
[16] N. Yağız, L.E. Sakman, "Fuzzy Logic Control of a Full Vehicle without Suspension Gap Degeneration", International Journal of Vehicle Design, Vol.42 , Nos. 1/2 , 2006.
[17] N. Yağız, L.E. Sakman, "Robust Sliding Mode Control of a Full Vehicle without Suspension Gap Loss", Journal of Vibration and Control, 11(11), pp.1357-1374, 2005.
[18] N. Yagiz, L.E. Sakman, "Vibrations of a Rectangular Bridge as an Isotropic Plate under a Traveling Full Vehicle Model", Journal of Vibration and Control, 12(1), pp.83-98, 2006.
[19] Y.Taskin, Y.Hacioglu, N.Yagiz, "Use of Fuzzy Logic Control to Improve the Ride Comfort of Vehicles", Strojniski Vestnik, 53(4), pp. 233-240, 2007.
[20] N.Yagiz, Y.Z.Arslan, Y.Hacioglu, "Sliding mode control of a finger for a prosthetic hand", Journal of Vibration and Control, 13(6), pp.733-749, 2007.
[21] N.Yagiz, L.E. Sakman, R.Guclu "Different control applications on a vehicle using fuzzy logic control", SADHANA, Vol.33, Part 1, pp. 15-25, 2008.
[22] Y.Z. Arslan, Y. Hacioglu, N. Yagiz, "Prosthetic Hand Finger Control Using Fuzzy Sliding Modes", Journal of Intelligent and Robotic Systems, 52(1),pp. 121-138, 2008.
[23] Y. Hacioglu, Y.Z. Arslan, N. Yagiz, "PI+PD Type Fuzzy Logic Controlled Dual-Arm Robot in Load Transfer", Strojniski Vestnik- Journal of Mechanical Engineering, 54 (5), pp. 347-355, 2008.
[24] N. Yagiz, Y. Hacioglu, Y. Taskin, "Fuzzy sliding mode control of active suspensions", IEEE Transactions on Industrial Electronics, 55 (11), pp. 3883-3890, 2008.
[25] N. Yagiz, Y. Hacioglu, "Backstepping control of a vehicle with active suspensions", Control Engineering Practice, 16 (12), pp. 1457-1467, 2008.
[26] N. Yagiz, Y. Hacioglu, "Robust control of a spatial robot using fuzzy sliding modes", Mathematical and Computer Modelling, 49 (1-2), pp.114-127, 2009.
[27] Y.Z. Arslan, Y. Hacioglu, N. Yagiz, "Fuzzy sliding mode control of a finger of a humanoid robot hand", Expert Systems, 26 (3), pp.291-303, 2009.
[28] Yagiz, N., Hacioglu, Y., Arslan, Y.Z., "Load transportation by dual arm robot using sliding mode control", Journal of Mechanical Science and Technology, 24 (5), pp. 1177-1184, 2010.
[29]Hacioglu, Y., Arslan, Y.Z., Yagiz, N., "MIMO fuzzy sliding mode controlled dual arm robot in load transportation", Journal of the Franklin Institute, 348(8), pp. 1886-1902, 2011.
[30] Hacioglu, Y., Yagiz, N., "Adaptive backstepping control with estimation for the vibration isolation of buildings", Journal of Vibration and Control, 18(13), 1996-2005, 2012.
[31] Arslan, Y.Z., Sezgin, A., and Yagiz, N., "Improving the ride comfort of vehicle passenger using fuzzy sliding mode controller", Journal of Vibration and Control, first published on August 14, 2013 as doi:10.1177/1077546313500061.
[32] Turkkan M., Yagiz N., "Fuzzy Logic Control for Active Bus Suspension System", Journal of Physics, pp.1-4, 2013.
[33]Turkkan, M., Yagiz, N., 2014, "Improving Ride Comfort of a Bus Using Fuzzy Logic Controlled Suspension", International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 8(4), 691-694.
[34] H.O. Ozer, A. Sayin, N. Korkmaz, N. Yagiz, "Sliding Mode Control Tuned by Multi Objective Genetic Algorithm for a Half Vehicle", International Journal of Scientific and Technological Research, vol.1, no.9, pp.42-54, 2015.
[35] Özer H. Ö., Sayın A., Korkmaz N., Yağız N., "Sliding Mode Control Optimized By Genetic Algorithm For Building Model", JOURNAL OF VIBRATION ENGINEERING AND TECHNOLOGIES, vol.4, no.1, pp.13-19, 2016.
[36] Özer H. Ö., Hacioğlu Y., Yağız N., "Suppression of structural vibrations using PDPI + PI type fuzzy logic controlled active dynamic absorber", JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, vol.38, no.7, pp.2105-2115, 2016, Doi: 10.1007/s40430-0462-x.
[37] Sezgin, A., Hacioglu, Y., Yagiz, N., 2016, "Sliding mode control for active suspension system with actuator delay", International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(8), 1406-1410.
[38] Turkkan, M., Yagiz, N., 2016, "Sliding mode control of a bus suspension system", International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(8), 1497-1501.
[39] Sezgin, A., Hacioglu, Y., Yagiz, N., 2016, "Distributed backstepping control with actuator delay for active suspension system", International Journal of Applied Mathematics and Informatics, 10, 105-109.
[40] Özer H. Ö., Hacıoğlu Y., Yağız N., "High Order Sliding Modes for Vehicle suspensions via Optimized Super Twisting Algorithm", International Journal of Mechanical And Production Engineering (IJMPE), ISSN: 2320-2092, Volume- 4, Issue-8, pp.47-52, Aug.-2016.
[41] Özer H.Ö., Hacioğlu Y., Yağiz N., "High order sliding mode control with estimation for vehicle active suspensions", TRANSACTİONS OF THE INSTİTUTE OF MEASUREMENT AND CONTROL, vol.39, pp.1-14, 2017.
[42] Taskin Y., Hacioglu Y., Yagiz N., "Experimental evaluation of a fuzzy logic controller on a quarter car test rig", JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, vol.39, pp. 2433-2445, 2017.
[43] Taskin Y., Yuksek I., Yagiz N., "Vibration Control of Vehicles with Active Tuned Mass Damper", JVE INTERNATIONAL LTD. JOURNAL OF VIBROENGINEERING., Vol. 19, Issue 5. ISSN 1392-8716, pp. 3533-3541, August 2017.
[44] Özer H.Ö., Hacioğlu Y., Yağiz N., "Controlling the Building Model Using High Order Sliding Mode Control Optimized by Multi Objective Genetic Algorithm", Periodicals of Engineering and Natural Sciences, vol.5, no.3, pp.256-262, 2017.
[45] Sezgin A., Hacioğlu Y., Yağiz N., "Control of Vehicle Active Suspensions with Actuator Delay via Distributed Backstepping", International Journal of Science and Engineering Investigations, vol.6, no.66917, pp.131-140, 2017.
[46] Özer H.Ö., Hacioğlu Y., Yağiz N., "High order sliding mode control with estimation for vehicle active suspensions", Transactions of the Institute of Measurement and Control, vol.40, no.5, pp.1457-1470, 2018.
[47] Sandal B., Hacioglu Y., Yagiz N., Salihoglu E., "Determination of Preanesthetic High-Risk Using Fuzzy Risk Evaluation for Surgical Operations", Turkiye Klinikleri J Med Sci. , 39(1): pp.19-25, 2019.
[48] Hacioglu Y., Yagiz N., "Fuzzy robust backstepping with estimation for the control of a robot manipulator", Transactions of the Institute of Measurement and Control, vol.41(10), pp.2816-2825, 2019.
[49] Özbek C., Özgüney Ö.C., Burkan R., Yagiz N., "Design of a fuzzy robust-adaptive control law for active suspension systems", Sadhana, 45:194, 16 Pages, 2020.
[50] Yildiz H., Korkmaz Can N., Özgüney Ö.C., Yagiz N., "Sliding mode control of a line following robot", JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 42:561, 13 Pages, 2020.
[51] Sandal B., Hacioglu Y., Salihoglu Z., Yagiz N., “Fuzzy Logic Preanesthetic Risk Evaluation of Laparoscopic Cholecystectomy Operations”, The American Surgeon, vol.89(3), pp.414-423, 2023.
[52] Ozbek C., Ozguney O.C., Burkan R., Yagiz N., “Ride comfort improvement using robust multi-input multi-output fuzzy logic dynamic compensator”, Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering, vol.237(1), pp.72-85, 2023.
[53] Ozbek C., Burkan R., Yagiz N., “Robust control of vehicle suspension systems with friction non-linearity for ride comfort enhancement”, Journal of Vibration and Control, DOI: 10.1177/10775463231162133, 2023.
[54] Özer H.Ö., Hacioğlu Y., Yağiz N., “Twin Rotor Control via Second Order Sliding Modes”, Journal of Vibration and Control, European Journal of Technique (EJT), vol.13(2), pp.101-107, 2023.
[55] Sandal B., Hacioğlu Y., Yağiz N., “MIMO fuzzy logic controller design of HVAC systems in cooling mode subjected to time-varying natural ventilation loads”, Sadhana, 49:149, pp.1-12, 2024.
[56] Özer H.Ö., Hacioğlu Y., Yağiz N., “Fuzzy Logic Enhanced Second-Order Sliding Mode Controller Design for an Experimental Twin Rotor System Under External Disturbances.”, Journal of Vibration Engineering and Technologies, https://doi.org/10.1007/s42417-024-01464-3, 2024.
|
|
|
Ulusal Hakemli Dergilerde Yayınlanan Makaleler:
|
|
|
|
[01] H.R. Güven, N. Yağız,
“Şaft-Disk Sisteminde Doğal Frekansların Hesaplanması”
Mühendis ve Makina Dergisi, Kasım
1993.
[02] H.R. Güven, N. Yağız,
“Şaft-Disk Sisteminde Doğal Frekansların Hesaplanması”,
Termo-Klima Bilimsel Teknik Dergisi, Haziran
1996.
[03] N. Yağız, “Otomotiv
Süspansiyon Sistemlerinin Kontrolü”, Otomotiv Dergisi, Mart
1997.
[04] N. Yağız, “ Taşıt Güç
Aktarma Organlarının Dinamik Davranışının Analizi”, Otomotiv
Dergisi, Mart 1999.
[05] N. Yağız, İ. Yüksek, H.R.
Güven, “Taşıt Süspansiyon Sistemlerinin Aktif
Kontrolünde Kullanılan
Metodların Tanıtılması ve Kıyası”, Mühendis ve Makina Dergisi,
Sayı:477, Ekim 1999.
[06]
İ. Yüksek, N. Yağız, T. Kepçeler,
“Sliding Modes Control of Vehicle Suspension Systems”, YTÜD
Yıldız Teknik Üniversitesi Dergisi, pp. 148-156, Sayı: 1999-4,Eylül
2000.
[07] N. Yağız, R. Güçlü, İ. Yüksek,
“Aktif Kütle Sönümleyicili Çok Serbestlik Dereceli Bir Yapının
Depreme Karşı LQR Kontrolü”, Mühendis ve Makina Dergisi,
Sayı:498, Temmuz 2001.
[08] R. Güçlü, N.
Yağız, “Dynamic Analysis of Vehicle Power Transmission
Systems”, YTÜD Yıldız Teknik Üniversitesi Dergisi, Sayı: 2001-1,
Temmuz 2001.
[09] N.Yağız, İ.Yüksek,
T.Kepçeler, “Sliding Mode Control of a Planar Flexible Single-Arm
Robot”, Politeknik Dergisi, Cilt:4, Sayı: 2, Haziran
2001.
[10] N. Yağız, R. Güçlü, İ. Yüksek,
“Fuzzy Logic Control of Vehicle Suspension Systems for Bumpy Roads”,
YTÜD Yıldız Teknik Üniversitesi Dergisi, Sayı: 2002-3, Ekim
2002.
[11] N. Yağız, R. Güçlü, İ. Yüksek, “PD Control
of Vibrations of Multi-Degree of Freedom Structural Systems”,
YTÜD Yıldız Teknik Üniversitesi Dergisi, Sayı: 2003-1, Mart
2003.
|
|
|
Uluslararası Konferanslarda
Sunulan Bildiriler:
|
|
|
|
[01] Y.S. Unlusoy, N. Yagiz,
“Simulation of the Effects of Dry Friction on
Suspension Dynamics
and Vehicle Ride”,
Inter. AMSE Conference, Sorrento, Italy, September
29-October 1, 1986.
[02] N. Yagiz, V. Ozbulur, “
An Alternative Approach in the Analysis of
Mechanical ”, 7th International Machine Design and Production
Conference, Ankara, September
1996.
[03] V. Ozbulur, N. Yagiz, “
Analysis and Sliding Mode Control of a Planer
Two Arm Robot by
Using Bond Graph Method ”, 7th International Machine Design and
Production Conference, Ankara, September
1996.
[04] N. Yagiz, “ Effect of Dry
Friction in Vehicle Suspension Systems on Ride Comfort”, The
Second Scientific-Technical Seminar on Gas Turbine Engines,
Istanbul, September 1996.
[05] I. Kirbaslar, N. Yagiz, “
Simulation of a Perforated Plate Distillation Column”,
ESM’97 European Simulation Multi Conference, Istanbul, June
1997.
[06] A. Derdiyok, N. Inanc, V.Ozbulur,
N.Yagiz, E.S. Varol, “ Design of Linear
Induction Machine to
Apply in Missile Flinging System”, ESM’97 European Simulation Multi
Conference, Istanbul, June
1997.
[07] N. Yagiz, V. Ozbulur, A. Derdiyok,
N. Inanc, “ Modeling and Simulation of a
Vehicle Having Dry
Friction on Suspensions Using Bond Graph
Method”, ESM’97
European Simulation Multi Conference, Istanbul, June
1997.
[08] A. Derdiyok, N. Yagiz, N. Inanc,
V. Ozbulur, “ Analysis and Simulation of a
Linear Induction
Machine Driven Rail Train”, ESM’97 European Simulation Multi Conference, Istanbul,
June 1997.
[09] S.H. Undil, N. Yagiz, S. Dinler,“
Modeling and Simulation of an Electrically
Driven Transport
Vehicle by Using Bond Graph Method”, ESM’97 European Simulation Multi Conference,
Istanbul, June 1997.
[10] N. Yagiz, V. Ozbulur, A. Derdiyok,
N. Inanc, “ Sliding Modes Control of Vehicle
Suspension
Systems”, ESM’97
European Simulation Multi Conference, Istanbul, June
1997.
[11] N. Yagiz, V. Ozbulur, N. Inanc,
A. Derdiyok, “ Sliding Modes Control of
Active Suspensions”,
12th IEEE International Symposium on Intelligent Control,
Istanbul, July
1997.
[12] I. Kirbaslar, N. Yagiz, L. Sevgili,
“ Simulation of a Binary Distillation Column” The
2nd International Symposium On Intelligent Manufacturing
Systems, Sakarya, April
1998.
[13]
N. Yagiz, H.R. Guven, “Bond Graph Analysis and Sliding
Modes Control of a Planar Two-Arm Robot”, Proceedings of Second
International Conference on Graphs & Mechanics, 10-12 October
1999, Gliwice, Poland.
[14] N. Yagiz, H.R. Guven, “Bond Graph Modeling
and Simulation of the Effects of Dry Friction on Vehicle
Dynamics”, Proceedings of Second International Conference on
Graphs & Mechanics, 10-12 October 1999, Gliwice,
Poland.
[15] I. Yuksek, N. Yagiz, F. Kaya,
“Vibration Control of Vehicle Systems by Means of Active
Controllers”, Proceedings of ETCE/OMAE2000 Joint Conference,
Energy for the New Millenium, February 14-17 2000, New
Orleans, LA.., USA.
[16] I. Yuksek, N. Yagiz, F. Kaya, “
Active Controller Design of Vehicle Suspension Systems”,
5th Engineering Systems Design and Analysis Conference of
ASME, July 10-13, 2000, Montreux, Switzerland.
[17] N. Yagiz, I. Yuksek, T. Kepceler,
F. Kaya, “ Sliding Mode Control of a Planar Flexible Single Arm
Robot”, 5th Engineering Systems Design and Analysis
Conference of ASME, July 10-13, 2000, Montreux,
Switzerland.
[18] I. Yuksek, N. Yagiz, F. Kaya,
“Sliding Mode Control of Active Suspensions a Non-Linear Full
Vehicle Model ”, 2nd International Symposium on
Mechanical Vibrations, September 25-28,2000, Islamabad,
Pakistan.
[19] N. Yagiz, T. Kepceler, I. Yuksek, R.
Guclu, “Sliding Mode Control of a Flexible Single-Arm Robot
”, 2nd International Symposium on Mechanical
Vibrations, September 25-28,2000, Islamabad,
Pakistan.
[20] N. Yagiz, I. Yuksek, R.
Guclu, “Sliding Mode Control of a Multi-Degree-of-
Freedom Structural System”, 2nd International
Symposium on Mechanical Vibrations, September 25-28,2000,
Islamabad, Pakistan.
[21] N. Yagiz, “Alternative Approaches in Sliding Mode
Control Theory”, 2nd International Symposium on
Mechanical Vibrations, September 25-28,2000, Islamabad,
Pakistan.
[22] T. Kepceler, I. Yuksek, N. Yagiz, F. Kaya,
"Vibration Control of a Two
Degrees Freedom Flexible Robot Arm by Sliding Mode Control
Theory",
32nd International Symposium on Robotics, Korea, 19-21
April 2001.
[23] N.
Yagiz, I. Yuksek, R. Guclu,
“Sliding Mode Control of
Active Suspensions without Suspension
Gap Degeneration”, International
Conference on Mechatronic Design and
Modeling, Konya, 13-14 September
2001.
[24] N. Yagiz, I. Yuksek, R.
Guclu, C.Ertal“Sliding Mode and PID Control of Active a
Structural System”,6th Biennial Conference on Engineering
Systems Design and Analysis, 8-11 July 2002, Istanbul.
[25] I. Yuksek, N. Yagiz, Y. Kikushuma, N. Tanaka, “Sliding
Mode Control of a Full Vehicle with Non-Linearity”, The 6th
International Conference on Motion and Vibration Control, 19-23
August 2002, Saitama, Japan.
[26] K. Yuksek, I.Yuksek, N. Yagiz, Y. Kikushuma, “Modal
Analysis of Viaduct Road Vibrations”, The 6th International
Conference on Motion and Vibration Control, 19-23 August 2002,
Saitama, Japan.
[27] I. Yuksek, N. Yagiz, R. Guclu, Y. Kikushuma, “Active
Control of Viaduct Road Vibrations using Sliding Modes”, The 6th
International Conference on Motion and Vibration Control, 19-23
August 2002, Saitama, Japan.
[28] F.N. Bodur, L.E. Sakman,
N. Yagiz, “Fuzzy
Logic Control of Active Suspensions without Suspension Gap
Degeneration”, The 4th International Symposium
On Intelligent Manufacturing Systems,
Sakarya-Turkey, September
2004.
[29] B. Bilgic, L.E. Sakman, N. Yagiz, “Use of Sliding Mode Controlled
Magneto-rheological Dampers on Vehicle Suspension Systems”, The
5th International Symposium on Intelligent Manufacturing
Systems, Sakarya, May 2006.
[30] L.E.
Sakman, F.N. Bodur, N. Yagiz, “Shifted Sliding Modes Control of
Active Suspensions”, The 5th International Symposium
on Intelligent Manufacturing Systems, Sakarya, May
2006.
[31] R. Guclu, N. Yagiz,
“Control Methods Applied on Structural Systems”, The
5th International Symposium on Intelligent Manufacturing
Systems, Sakarya, May 2006.
[32] R. Guclu, N. Yagiz, “LQR
and Sliding Mode Controller Design for a Multi-Degree-of-Freedom
Structure with Active Mass Damper”, The 5th
International Symposium on Intelligent Manufacturing Systems,
Sakarya, May 2006.
[33] N. Yagiz,
Y. Hacioglu,Y. Z. Arslan, “Robust control of a prosthetic hand
finger”, Proceedings of 5th European Symposium on BioMedical
Engineering, ESBME 2006 , Patras, Greece, July 7-9,
2006.
[34] Hacioglu, Y., Arslan, Y.Z., Akan, A., Yagiz, N., "PI-type fuzzy logic control of a dual arm robot", Proceedings of the 9th WSEAS International Conference on Automatic Control, Modeling & Simulation, Istanbul, Turkey, May 27-29, 42-45, 2007.
[35] Yagiz, N., Hacioglu, Y., Arslan, Y.Z., "Simultaneous trajectory manipulation of a dual-arm robot using sliding mode control", Proceedings of the 12-th International Conference on Aerospace Sciences & Aviation Technology, Cairo, Egypt, May 29-31, (ROB-01) 1-12, 2007.
[36] Yagiz, N., Hacioglu, Y., Taskin, Y., "Sliding mode control of a vehicle with non-linearities", Sixth EUROMECH Nonlinear Dynamics Conference (ENOC-2008), Saint Petersburg, Russia, June 30-July 4, 2008.
[37] Hacioglu, Y.,Yagiz, N., "Fuzzy sliding mode controllers for vibration suppression of buildings", XV Scientific Convention of Engineering and Architecture (CCIA 15), Habana, Cuba, November 29-December 3, 2010.
[38] Arslan, Y.Z.,Ulus, T., Yagiz, N., "Assessment of force prediction performances of the phenomenological musculotendinous unit models", XV Scientific Convention of Engineering and Architecture (CCIA 15), Habana, Cuba, November 29-December 3, 2010.
[39] Sezgin A., Ulus, T., Yagiz, N., "The Modeling and Simulation of a Half-Vehicle Model with Driver", Second International Conference on Advances in Mechanical Engineering- AME 2011, Noida, Near New Delhi, INDIA, 20 to 21 Dec 2011.
[40] Ozer, H.O., Yagiz, N., "Reducing Vibration Effects on the Two Storey Building Model Using Dynamic Absorber ", Second International Conference on Advances in Mechanical Engineering- AME 2011, Noida, Near New Delhi, INDIA, 20 to 21 Dec 2011.
[41] NSezgin A., Yagiz, N., "Analysis of Passenger Ride Comfort", International Conference on Structural Noninear Dynamics and Diagnosis 2012 - CSNDD 2012, Marrakech, MOROCCO, 30 April to 02 May 2012.
[42] Taskin, Y., Yagiz, N. and Yuksek, I.,"Lumped Parameter Identification of a Quarter Car Test Rig", International Conference on Mathematical Modeling in Physical Sciences, Budapest, Hungary, September 3-7, 2012.
[43] Hacioglu, Y., Yagiz, N., "Control of vehicle active suspensions by using PD+PI type fuzzy logic with sliding surface", International Conference on Mathematical Modeling in Physical Sciences, Budapest, Hungary, September 3-7, 2012.
[44] Turkkan, M., Yagiz, N., Fuzzy logic control for active bus suspension system, International Conference on Mathematical Modeling in PhysicalSciences, Budapest, Hungary, September 3-7, 2012.
[45] Ozer, H.O., Yagiz, N., Dynamic Absorber Design for Experimental Two Storey Building Model, 10th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2012), Kos, Greece, September 19-25, 2012.
[46] H. Ozer, A. Sayin, N. Korkmaz, N. Yagiz, "Sliding Mode Control Optimized By Genetic Algorithm For Building Model", 11th International Conference on Vibration Problems (ICOVP-2013), Portugal, September 9-12, 2013 19-25, 2013.
[47] M. Turkkan, N. Yagiz, "Improving Ride Comfort of a Bus Using Fuzzy Logic Controlled Suspension", ICMAME 2014: International Conference on Mechanical, Aeronautical and Manufacturing Engineering, Lisbon-Portugal, April 17-18 2014.
[48] H.Ö. Özer, Hacioglu Y., N. Yagiz, "High Order Sliding Mode Control of a Pendulum", 2nd International Conference on Electrical,Computer,Mechanical and Mechatronics Engineering (ICE2015), ISTANBUL, TÜRKIYE, 27-28 Ağustos 2015, pp.52-52.
[49] H.O. Ozer, N.Yagiz, Y. Hacioglu, "Suppression of Structural Vibrations Using Dynamic Absorber", International Conference on Engineering Vibration (ICOEV 2015), Ljubljana, SLOVENYA, 7-10 Eylül 2015, pp.897-907.
[50] Özer H. Ö., Hacıoğlu Y., Yağız N., "High Order Sliding Modes for Vehicle Suspensions via Optimized Super Twisting Algorithm", The IRES - 63rd International Conferences on Engineering and Natural Science (ICENS), Amsterdam, Hollanda, June 26-27, 2016, pp. 5-10.
[51] Turkkan M., Yagiz N., "Sliding Control of a Bus Suspension System", ICAME: 2016, 18th International Conference on Automotive and Mechanical Engineering, Barcelona, Spain, August 11-12, 2016.
[52] Sezgin A., Hacioglu Y., Yagiz N., "Sliding Mode Control for Active Suspension System with Actuator Delay", ICAME: 2016, 18th International Conference on Automotive and Mechanical Engineering, Barcelona, Spain, August 11-12, 2016.
[53] Özer H. Ö., Hacıoğlu Y., Yağız N., "Optimized Super Twisting Algorithm for Active Suspension System of a Quarter Car Model", 5th International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering (ICE-2016), İstanbul, Türkiye, September 1-2, 2016, pp. 32-32.
[54] Korkmaz Can N., Türkkan M., Yağiz N., "Multi-Body Analysis of Human Cervical Spine for Whiplash Effect", 5th International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering, İSTANBUL, TÜRKIYE, September 1-2, 2016, pp.32-32.
[55] Özer H.Ö., Hacioğlu Y., Yağiz N., "Controlling the building model using high order sliding mode control optimized by multi objective genetic algorithm", International Conference on Engineering Technology and Innovation, Sarajevo, BOSNA HERSEK, March 22-26 2017, pp.1-6.
[56] Turkkan M., Yagiz N., "Fuzzy-Sliding Mode Control of a Quarter Bus Model with an Air Suspension System", International Conference of Applied Sciences, Engineering and Mathematics, Struga, MAKEDONYA, May 5-7 2017, pp.71-71.
[57] Turkkan M., Yagiz N., "Vibration Control of a Bus Suspension System with an Air Spring Using PD Type Fuzzy Logic Controller", International Conference of Applied Sciences, Engineering and Mathematics, Struga, MAKEDONYA, May 5-7 2017, pp.73-73.
[58] Sezgin A., Hacioğlu Y., Yagiz N., "Distributed Backstepping Approach for the Control of Half-Car Active Suspensions with Input Delay", 2nd International Conference on Mechanical Engineering and Robotics Research (ICMERR 2017), Paris, FRANSA, 11-13 Dec 2017, pp.1-4
[59] Özbek C., Burkan R., Yagiz N., "Stability of Model Reaching Adaptive Control Law and its Verification on a Quarter Car", 2. Mediterranean Natural Sciences and Engineering Congress (MENSEC 2018), Podgorica, Karadağ, 26-29 June 2018, pp. 41-54.
[60] Özbek C., Burkan R., Yagiz N., "Implementation of Model-Based Adaptive Controller on Vehicle Active Suspension Systems", 4th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 19-21 Dec 2018, pp. 499-507.
[61] Sandal B., Hacioglu Y., Yagiz N., " Mathematical modelling and analysis of a heating system", İstanbul, Türkiye, 19-21 Dec 2018, pp. 1626-1630.
[62] Sandal B., Hacioglu Y., Yagiz N., "Dynamic modelling and simulation of a cooling system", İstanbul, Türkiye, 19-21 Dec 2018, pp. 1631-1636.
[63] Ozbek, C., Burkan, R. and Yagiz, N., (2018), "Stability of Model Reaching Adaptive Control Law and its Verification on a Quarter Car", 2nd Mediterranean Natural Sciences and Engineering Congress, MENSEC 2018, University of Donja Goritsa, June 2018, Podgorica-Montenegro.
[64] Ozbek, C., Burkan, R. and Yagiz, N., (2018) "Implementation of Model-Based Adaptive Controller on Vehicle Active Suspension Systems", 4th Conference on Advances in Mechanical Engineering, ICAME2018, Yildiz Technical University, December 2018, Istanbul.
[65] Sandal B., Hacioglu Y., Yagiz N., "PID control design for a cooling system", 4th International Energy & Engineering Congress 2019, 24-25 Oct 2019, pp.214-222, Gaziantep, TÜRKIYE.
[66] Sandal B., Hacioglu Y., Yagiz N., “Investigation of a heating system under On-Off Control”, International Natural Science, Engineering and Materials Technology Conference, Sep 9-10, 2019, pp.42-51,İstanbul, TURKEY.
|
|
|
Ulusal Konferanslarda Sunulan
Bildiriler:
|
|
|
|
[01] F. Arslan, H.R. Güven, N. Yağız, "Bond Graf Metodu ile Uçak Durdurma Mekanizmasının Modelleme ve Simulasyonu", Elektrik Mühendisliği 5. Ulusal Kongresi, Trabzon, Eylül 1993.
[02] N. Yağız, H.R. Güven, "Bond Graf Metodu ile Bir Hidrolik Servomotorun Modelleme ve Simulasyonu", IX. Ulusal Mekanik Kongresi, Ürgüp, Eylül 1995.
[03] N.Yağız, S.H. Ündil, " Bir Elektrikli Ulaşım Taşıtının Bond Graf Metodu ile Modelleme ve Simulasyonu", 7. Ulusal Makina Teorisi Sempozyumu, İstanbul, Eylül 1995.
[04] N.Yağız, F. Arslan, "Bond Graf Metodu ile Taşıt Süspansiyon Sisteminin Modelleme ve Simulasyonu", 7. Ulusal Makina Teorisi Sempozyumu, İstanbul, Eylül 1995.
[05] N.Yağız, V.Özbulur, "Bir Elektromekanik Sistemin Kayan Kipli Denetimle Konum Kontrolü", 7. Ulusal Makina Teorisi Sempozyumu, İstanbul, Eylül 1995.
[06] N. Yağız , "Bond Graf Metodu ile Bir Sarkacın Modelleme ve Simulasyonu", Mühendislikte 20. Yıl Sempozyumu, Zonguldak, Ekim 1995.
[07] S.H. Ündil, N. Yağız, S. Dinler, "Bond Graf Metodu ile Bir Elektrikli Ulaşım Taşıtının Analizi", TOK'96 Otomatik Kontrol Ulusal Toplantısı, İstanbul, Mart 1996.
[08] N.Yağız, V. Özbulur, " İki Kollu Düzlemsel Bir Robotun Bond Graf Metodu Kullanılarak Analizi", TOK'96 Otomatik Kontrol Ulusal Toplantısı, İstanbul, Mart 1996.
[09] V. Özbulur, N. Yağız, O.Bilgiç," Anahtarlamalı Relüktans Motorunun Kayan Kipli Denetimle Hız Kontrolu", TOK'96 Otomatik Kontrol Ulusal Toplantısı, İstanbul, Mart 1996.
[10] İ. Kırbaşlar, N.Yağız, U. Dramur, " Bir Destilasyon Kolonunun Modellenmesi ve Simulasyonu ", ZİS'96 Zeki İmalat Sistemleri Sempozyumu, Sakarya, Mayıs 1996.
[11] N.Yağız, V. Özbulur, " Taşıt Güç Aktarma Organlarının Bond Graf Metodu ile Modellenmesi ve Simulasyonu", ZİS'96 Zeki İmalat Sistemleri Sempozyumu, Sakarya, Mayıs 1996.
[12] V. Özbulur, N.Yağız, O. Bilgiç, A. Derdiyok, N.İnanç," Anahtarlamalı Relüktans Motorunun Kayan Kipli Denetimle Konum Kontrolu", ZİS'96 Zeki İmalat Sistemleri Sempozyumu, Sakarya, Mayıs 1996.
[13] İ. Kırbaşlar, N.Yağız, U. Dramur, "Otomatik Kontrollu Bir Destilasyon Kolonunun Simulasyonu ", İkinci Ulusal Kimya Mühendisliği Kongresi, İstanbul, Eylül 1996.
[14] N.Yağız, " Otomotiv Süspansiyon Sistemlerinin Kayan Kipli Kontrolü ", 8. Ulusal Makina Teorisi Sempozyumu, Elazığ, Eylül 1997.
[15] S.S. Erdem, N. Yağız, "Bond Graf Metodu ile Aktif Süspansiyona Sahip Bir Taşıtın Modellenmesi ve Simulasyonu", Makina Tasarım Teorisi ve Modern İmalat Yöntemleri Konferansı, Ankara, Eylül 1997.
[16] R.Güçlü, N.Yağız, İ.Yüksek, "Aktif Ayarlı Kütle Sönümleyicili Bir Binanın Kayan Kipli Kontrolü", UMTS 2001, 10. Ulusal Makina Teorisi Sempozyumu, 12-14 Eylül 2001, Konya.
[17] N.Yağız, R.Güçlü, İ.Yüksek, "Taşıt Süspansiyon Sistemlerinin Bulanık Mantıklı Kontrolü", UMTS 2001, 10. Ulusal Makina Teorisi Sempozyumu, 12-14 Eylül 2001, Konya.
[18] N.Yağız, T.Sağdıç, C.Ertal, "Aktif Süspansiyonlu Tam Taşıt Modelinin Kayan Kipli Kontrolü", OTEKON 2002, 24-26 Haziran 2002, Bursa.
[19] N.Yağız, R.Güçlü, S.Erdem, "Bulanık Mantık ile Taşıt Süspansiyon Sistemlerinin Aktif Kontrolü", OTEKON 2002, 24-26 Haziran 2002, Bursa.
[20] M. S. Tabak, N. Yağız, "Dört Akslı Bir Tren Modelinin Titreşiminin İncelenmesi", MBGAK'2003, 17-20 Şubat 2003, İstanbul.
[21] A. Gültekin, B. İslam, N. Yağız, "Dört Yolculu Tam Taşıt Modelinin Modelleme ve Simulasyonu", MBGAK'2003, 17-20 Şubat 2003, İstanbul.
[22] M. Güler, M. Haklıdır, N. Yağız, "Analysis of a Planar Two-Link Robot on a Square Trajectory", MBGAK'2003, 17-20 Şubat 2003, İstanbul.
[23] N.Yağız, C.Ertal, "Deprem Etkisindeki Binanın Kayan Kipli Kontrolü", UMTS 2003, 11. Ulusal Makina Teorisi Sempozyumu, 4-6 Eylül 2003, Ankara.
[24] N.Yağız, L.E.Sakman, "Taşıt Titreşimlerinin Süspansiyon Çalışma Aralığı Kaybı Olmadan Bulanık Mantık ile Kontrolü", UMTS 2005, 12. Ulusal Makina Teorisi Sempozyumu, 9-11 Haziran 2005, Kayseri.
[25] Y.Taşkın, N.Yağız, "Tek Serbestlik Dereceli Bir Titreşim Sisteminin Model Parametrelerinin Deneysel Olarak Belirlenmesi", MBGAK 2005,II. Mühendislik Bilimleri Genç Araştırmacılar Kongresi, 17-19 Kasım 2005, İstanbul.
[26] Y. Hacıoğlu, N. Yağız, "Geri adımlamalı kontrol ile taşıtların seyir konforunun iyileştirilmesi", 13. Ulusal Makina Teorisi Sempozyumu, 7-9 Haziran, 2007, Sivas.
[27] Y. Hacıoğlu, N. Yağız, 2009, "Robust geri adımlamalı kontrol ile robot yörünge takibi", Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı 2009, TOK'09, İstanbul, 13-16 Ekim.
[28] A. Sezgin, N.Yağız, "Bir Çeyrek Taşıt Modelinin Sürücüsü ile Modellenmesi ve Simülasyonu", UMTS 2011, 15. Ulusal Makina Teorisi Sempozyumu, 16-18 Haziran 2011, Niğde.
[29] M. Gözütok, N.Yağız, "Otobüslerde Seyir Konforunun Bulanık Mantıklı Kontrolcü Kullanılarak İyileştirilmesi", UMTS 2011, 15. Ulusal Makina Teorisi Sempozyumu, 16-18 Haziran 2011, Niğde.
[30] H.Ö. Özer, N.Yağız, “Bir Bina Modelinin Titreşimlerinin Deneysel Analizi”, UMTS 2011, 15. Ulusal Makina Teorisi Sempozyumu, 16-18 Haziran 2011, Niğde.
[31] Sezgin A., Arslan Y.Z., Yagiz N.,""Yol Kaynaklı Taşıt Titreşimlerinin Insan Vücudu Üzerindeki Etkisinin Kayan Kipli Kontrolcü ile Azaltılmasi" ", 16. Ulusal Makina Teorisi Sempozyumu, Sayfa 34-41, 11-12 Eylul 2013, Erzurum.
[32] Özbek C., Burkan R., Yağız N., “Taşıt Süspansiyon Sistemlerinin Lyapunov Esaslı Gürbüz Kontrolü”, 20. Ulusal Makine Teorisi Sempozyumu, 15-17 Eylül 2021, Diyarbakır.
[33] Özbek C., Burkan R., Yağız N., “Taşıt Süspansiyon Sistemlerinin Model Esaslı Gürbüz Terminal Kayan Kipli Kontrolü”, 21. Ulusal Makine Teorisi Sempozyumu, 13-15 Eylül 2023, Trakya Üniversitesi, Balkan Kongre Merkezi.
|
|
Uluslararası Kitap Bölümü Yazarlığı:
[01] , Y.Z. Arslan,Y. Hacıoglu, Y.Taskin, N. Yagiz,“"Handbook of Research on Advancements in Robotics and Mechatronics"”, , Chapter 16, Control of a Biomimetic Robot Hand Finger: Classical, Robust, and Intelligent Approaches, Y.Z. Arslan, Y. Hacıoglu, Y.Taskin, N.Yagiz, ISBN 978-1-4666-7387-8.
|
|
